Corefix 100 5 x 100mm Dot-and-Dab Wall Fixings

Corefix 100 dot-and-dab wall fixings anchor heavy fixtures through plasterboard into the solid masonry behind, using a steel core to bridge the cavity without crushing the board.

• Suitable for plasterboard on dot-and-dab adhesive or battens.
• Zinc-plated steel core bridges the gap to the masonry.
• For brick, block and lightweight concrete substrates.
• Plug diameter: 10mm.
• Plug length: 95mm.
• Required drill-hole diameter: 10mm.
• Minimum drill-hole depth: 100mm.
• Maximum fixture thickness: 10mm.
• Manufacturer code: CFX004T.